Die-Casting Mold Temperature Monitoring
Mold temperature control · coating · casting cycle · equipment linkage · value
Thermal balance under control in every die-casting cycle
Where thermal imaging pays off
Mold defect control
Real-time cavity thermal imaging; crack/soldering/flow defects diagnosed. Scrap rate down 15%
Release agent monitoring
Auto before/after temperature comparison; spray cycle shortened 20%
Full cycle monitoring
Auto capture per cycle, 50 ROI zones with individual alarms, photo records
Machine linkage
Sound-light alarms, PLC + MODBUS to MES, full process traceability
Harsh environment
Air cooling + air purge + IP67, 7×24 in high-temp oil mist
Proven results
Yield +0.8%, mold life +10%, >¥300K annual gain per machine
Giga-casting mold monitoring, scrap down 15%
Spray optimization: cycle -20%, full traceability
Recommended thermal cameras
Frequently asked questions
Which thermal camera should I choose for die-casting mold temperature monitoring?
Selection depends on target distance, required spatial resolution and temperature range. Recommended models: ET-640FH, ET-640HYC, ET-640TD. — send your parameters to yichuanqifeng@163.com and our engineers will recommend a configuration.
Can the system be integrated with our existing PLC / SCADA?
Yes. Our online thermal cameras provide Ethernet with Modbus TCP, ONVIF and an open SDK, so temperature data and alarms can be pushed to PLC, SCADA or MES systems.
Do you provide on-site commissioning?
Remote commissioning and parameter tuning are included. On-site support is available for large projects in China and can be arranged overseas together with our distributor.
Other applications
Discuss your project
Send your process details and the temperature range. We reply with a camera, lens and mounting plan.
Thank you. An engineer will reply within one working day.
Talk to an application engineer
Send a photo of your process and the temperature range you need to monitor — we will propose a camera, lens and mounting plan.


