EE-Trend-IRInfrared Thermal Imaging
Wind Power Thermal Monitoring

Wind Power Thermal Monitoring

Turbines · booster stations · offshore wind · perimeter · smart O&M

Guarding turbines, powering green energy

Where thermal imaging pays off

Nacelle internals

Shaft, brake disc, generator, cabinet thermography

Cable monitoring

Joints and bending sections continuous thermography

Control cabinet & converter

IGBT, bus capacitors, terminals monitoring

Brake disc

7×24 real-time disc & pad surface thermography

Booster transformers

HV/LV rooms 7×24 monitoring, non-contact inside box transformers

Substation primary equipment

Body, bushing, oil conservator 24h monitoring

Proven results

Goldwind / Envision / Mingyang

Nacelle brake disc 7×24 monitoring against fire loss

SE Wind / CSIC Haizhuang / Sany

Cable & converter monitoring, failures -85%

GUODIAN United Power / Dongfang

Booster station monitoring, smart O&M

Recommended thermal cameras

Frequently asked questions

Which thermal camera should I choose for wind power?

Selection depends on target distance, required spatial resolution and temperature range. Recommended models: ET-610AYC, ET-640TD, K384. — send your parameters to yichuanqifeng@163.com and our engineers will recommend a configuration.

Can the system be integrated with our existing PLC / SCADA?

Yes. Our online thermal cameras provide Ethernet with Modbus TCP, ONVIF and an open SDK, so temperature data and alarms can be pushed to PLC, SCADA or MES systems.

Do you provide on-site commissioning?

Remote commissioning and parameter tuning are included. On-site support is available for large projects in China and can be arranged overseas together with our distributor.

Other applications

Discuss your project

Send your process details and the temperature range. We reply with a camera, lens and mounting plan.

Chat on WhatsApp

We use these details only to answer this inquiry. No newsletter, no third-party sharing. See our Privacy Policy.

Talk to an application engineer

Send a photo of your process and the temperature range you need to monitor — we will propose a camera, lens and mounting plan.